![]() So for planetary you'll get reasonable frame rates if you use the RoI feature, but if you wanted to use the full resolution for lunar/solar then you might be limited because of teh relatively low framerate that you may get. Running 1920x180 resolution I got about 8-9 fps, at 640x480 RoI I could consistently get 55 fps and with a 320x240 RoI that went up to around 140 fps. I've never used it in anger for planetary imaging but I've just done a test with my ZWO290 mono camera. I think it's the same spec- Intel J4125 CPU, 8GB RAM & 128GB ROM, but limited to only 2 USB ports. I use the Intel Compute Stick version of the Mele 2 for scope control. I know I could use my Asiair but my lunar/planetary camera is an Altair. SNUNMU Mini PC, 8GB RAM+128 ROM,Intel Celeron J4125,Windows 11 Pro Mini Computer, 2.4G & 5.0G WiFi, 4K UHD, Gigabit Ethernet, BT 4.2 Desktop Computers for Office, Business, Home, School : .uk: Electronics & Photo The unit you use looks good but it's too expensive for me at this time I had been looking at something like this: I hadn't considered letting the mini pc do the work I must admit. Personally I went for a fanless PC as it reduces the risk of vibration. I have used a big standard pentium to run planetary without a problem. You do not need anything too special for planetary imaging, it is mainly the transfer rates. If you use wifi, I think your frame rates are likely to be impacted by the wifi speed. I would suggest that you do the work on the telescope PC and just use remote access to control it. I use a Miele Quieter 2 but this is for deep sky and I am not sure how good it would be for planetary. What I'd like to know is what minimum specs I should be looking at considering my laptop indoors would be doing the donkey work. I read somewhere (maybe on here) about relatively cheap mini pc's on Ebay or similar and I've been looking at some. I know I can strip back the mount to use as a right side mounted alt az mount but I'd really rather leave it set up in EQ.Ī solution I've been mulling over is to use a NUC/mini pc on my EQ5 to send images via wifi to my laptop using Sharpcap remotely, I'm getting on in years and have an auto immune rheumatic condition and the prospect of sitting in the warm during winter nights is appealing! Although I'm an experienced PC builder I'd rather buy a ready built one but the price for an occasional use machine is off-putting. I would be using my Mak 127 for this and it's probably too heavy for the Az GTi in EQ mode even for relatively short periods of imaging compared to deep sky. I've now fully converted my Az GTi to EQ mode for sort of grab and go remote EEA but would like to get into remote lunar/planetary imaging.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |